VPI’s PRT Earthtones line is manufactured with the same exacting standards that distinguish our Electro-static Discharge (ESD) flooring tile. The result is a tile that’s exceptionally tough, long lasting and beautiful—a world-class floor that will perform for decades.

• Superior durability in the most demanding environments
• High traffic areas in schools, offices and hospitals
• No lamination or wear layer—100% homogenous construction from top to bottom
• Longest wear warranty in the industry—25 years
• Highest load rating—can withstand weight of medical beds and forklift trucks
• One of the smallest carbon footprints in the industry
• Micro-squaring technology means tighter joints, reduces “dirty mop water seam” between tiles
• Available in 24 colors
• No detectable VOC emissions

PRT Specifications

• Gauge: 1/8″ (3mm)
• 24 Colors Available
• Static Load Limit: in excess of 2,500 psi
• Avail. in 12″ x 12″, 24″ x 24″ & 36″ x 36″* (24’s and 36’s can be welded to be seamless).
• 25 Year Wear Warranty

*Please note: 24″x24″ and 36″x36″ tiles have minimum order requirements.

Adhesives

VPI 100

A two part epoxy especially engineered for use with heavy load traffic or heavy static loads such as hospital beds. Depending on conditions and application, spread rate is nominally 135 square feet. RH requirements are a maximum of 85% and a PH of 6 – 9.  See adhesive section for more details including substrate requirements and open times. Zero detectable VOC’s.

VPI 520

A simple to use one part adhesive for use on or above grade. Can be used on porous or non-porous substrates in applications with light to medium traffic. Depending on conditions and application, spread rate is nominally 135 square feet. RH requirements are a maximum of 85% and a PH of 7 – 11. See adhesive section for more details including substrate requirements and open times. Zero detectable VOC’s.

Spray Lock 6500

Approved for use with our PRT tile. A simple to use one part acrylic aerosol “spray-on” adhesive for extra convenience. Can be used on or above grade on porous or non-porous substrates in applications with light to medium traffic. Depending on conditions and application, spread rate is nominally 125 square feet. RH requirements are 90% (firm). See adhesive section for more details including substrate requirements and open times.

Adhesive Details

Installation & Maintenance

Specification Details

Performance Properties

LEED Credits & VOCs

MSDS

Videos

Warranty

Catalogs & Sales Info